BPNVT - FORM-A-JIG HEAT RESISTENT COMPOUND (BROWN)
- MSDS: BPNVT
- Manufacturer: EUTECTIC CORP
- Product Name: FORM-A-JIG HEAT RESISTENT COMPOUND (BROWN)
- National Stock Number: 3439-00-165-4164
Product Identification
Product ID:FORM-A-JIG HEAT RESISTENT COMPOUND (BROWN)
MSDS Date:06/03/1992
FSC:3439
NIIN:00-165-4164
MSDS Number: BPNVT
Responsible Party
FLUSHING, NY 11358-2799
US
Emergency Phone: 718-358-4000
Info Phone: 718-445-1784
Cage: 72271
Contractor
Telephone: 704-527-9800/ 800-221-1433
Cage: 72271
Ingredients
SILICA GEL
CAS: 112945-52-5
RTECS: VV7310000
OSHA PEL 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: 5-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
MAGNESIUM OXIDE
CAS: 1309-48-4
RTECS: OM3850000
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT MAY CAUSE PARTICULATE
IRRITATION. INHALATION OF DUST MAY CAUSE MILD RESPIRATORY
IRRITATION.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:EYES: TEARING, DISCOMFORT. INHALATION:
COUGHING, SHORTNESS OF BREATH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALED: REMOVE TO FRESH AIR. EYES: FLUSH WITH LOTS OF WATER
FOR 15 MINUTES. SEE DOCTOR.
Fire Fighting
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
BUNKER GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SWEEP UP AND PLACE IN A CONTAINER FOR LATER
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE IN A WELL VENTILATED AREA WITH
PROPER SAFETY EQUIPMENT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF REGUALTORY LIMITS ARE EXCEEDED; USE
NIOSH/MSHA APPROVED RESPIRATOR FOR DUST. USE IN ACCORDANCE WITH 29
CFR 1910.134.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:SEE OTHER EQUIPMENT
Eye Protection:WELDERS HELMET WITH PROPER LENSES
Other Protective Equipment:WEAR HAND, HEAD AND BODY PROTECTION FROM
RADIATION, SPARKS, AND ELECTRICAL SHOCK DURING USE WITH WELDING
EQUIPMENT
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.